Friday, November 1, 2013

Rick’s Knife Handle

 
My son-in-law Rick brought me a beautiful steel knife blade with tang, and a piece of buckeye burl wood, and he asked me if I would make him a knife handle.  I couldn’t say “no”.  He must have thought that just because I make things out of wood, I would automatically know how to make a knife handle.  Wrong.  I’ve never done this before.  If he had asked me to whittle a stick in the shape of a knife, I would have used trial and error until I got it right, but with one expensive blade and one fancy piece of wood, I knew I would only get one single shot at doing it right.  Thanks Rick.  I really needed the stress.

Well the bottom line is that, like so many things in life, I created stress where there was no reason for stress.  The task was actually not as difficult as I had first imagined.  As a first step, I searched the internet (and more specifically YouTube), for information on how to attach pieces of wood to the knife tang and make a handle out of it.  As you might imagine, it’s all there.  Also, as you might imagine, there are a number of different approaches or techniques.  Most of the techniques use epoxy to hold the wood handle parts to the metal tang, and that’s the direction I took.  Of course, you have to use metal pins to hold the whole thing together, but with the use of the epoxy, there is no need to peen the pins to secure the wooden halves as you might expect. I used some common sense and left some exposed wood in all directions for sanding.  Even though I normally hate sanding most wooden objects I make, I have to admit that sanding and shaping the knife handle was actually fun.  My stationary belt sander was quite useful in the shaping.
   

I wrapped the blade and the exposed metal in duct tape
to protect the finish, and my hands.
During the shaping on the belt sander,
I scraped the metal on the handle.
This came out with steel wool and buffing.
I used tung oil for the
finish, and fine sanded
between each coat to get a
very smooth result.


Of course I couldn’t just hand him the knife, so I fixed up one of my flat cigar boxes as sort of a “presentation box”.  I must admit, I was pretty proud of the final result.  Now that I am an “expert” at making knife handles, I’m starting to look into knife kits on the internet.  Have any of you had any experiences with making knife handles?  If so, I would love to hear about them.

The finished knife in a presentation box

3 comments:

Anonymous said...

You should be proud! Rick was confident you could pull it off - no stress necessary. Not only is it beautiful, but it feels great too - just the right weight & smoothness. Rick loves it, and loves showing it off to people. Be prepared...you might be getting more orders! By the way, you forgot to mention that Rick is a chef - that's why he was so interested in having a beautiful knife - although I'm not sure if he'll actually use this one!!

Love, Maria

Anonymous said...

Doh! I got beat out on commenting. I had been getting comfortable with being the first. This is nice work Dad. I can see why you were worried but of course you came through with a nice end product. People who place orders will have to provide the fancy wood though right? Where did Rick find the burled piece he offered? Anyway, nice to see you expanding into all forms of artisan craft. How's the ESPY business doing?

-Dave

Anonymous said...

Hey Dave! Well I had to beat you at least once - and especially for an entry about my own husband! It really did turn out beautifully - we will have to remember to bring it at Thanksgiving so you can see. I think Rick found the wood - where else - online (I think maybe even ebay??). As for etsy - the sight looks great, but I am probably going to try to claim back a few boxes before they get sold!! Take a look and get your dibs too before they are gone!
M. ;)